|
information about all the devises Connected to the system. After
checking the processor and RAM it checks for devise such you're
hard disk, CD-ROM, etc., and display them on screen with
messages such As 'detecting IDE drives...' and Found Primary
Master....'etc. Sometimes your BIOS Just refuses to recognize
your hard disk, basically making it useless-there's no way
windows will recognize your hard disk if the BIOS doesn't. Let's
see why this happens:
The most common reason is a loose or badly connected data cable.
Make sure the data cable is plugged in properly, both into the
hard disk, as well as the motherboard. The same goes for power
cable, so check that as well. Also, make sure that the red lines
on the data cable and power cable are adjacent to each other.
FocusStor, launches a new data backup & recovery software FocusStor, Online Data Backup & Recovery ( www.focusstor.net ), the leading Canadian provider of disk-based backup and recovery solutions for small businesses since 1985, today released their newest offsite storage software. In today s insecure world, cables become unplugged, electronics fail daily, disks stop turning, viruses and hackers burden businesses constantly, and regardless of specific backup procedures, electronic records will continue to be discarded and overwritten.
Each year businesses loose billions of dollars due to data loss. The factors used to determine the viabil ..
One you've ruled out any cable problems, check the jumper
setting on the drives. If two drives are connected to a port,
make sure one is set as master and the other as Slave, or else
both are set to Cable Select.
Next, make sure your drive controllers on your motherboard are
not disabled. These controllers control IDE devices, and without
them the BIOS cannot detect the drives. Go to the BIOS setup,
and under the Integrated Peripherals menu, make sure that 'On
Board HDC' is enabled for both Primary and Secondary channels.
Also ensure that all drive types are set to AUTO under the
Standard CMOS Setting. If you are not comfortable with changing
How to Really Create a Startup DiskPermission is granted for the below article to forward, reprint, distribute, use for ezine, newsletter, website, offer as free bonus or part of a product for sale as long as no changes are made and the byline, copyright, and the resource box below is included. ---------------------------------------------------------- How to Really Create a Startup Disk By Stephen Bucaro Most people don t consider creating a Startup Disk until their computer fails to start - then it s too late. A startup disk will not start Windows, but it will start your computer in DOS. The most common reasons for a computer not starti ..
the BIOS values, just reset the BIOS to factory defaults.
When all else fails, so has your hard disk send it to a
technician for servicing.
About the author:
Ravi chamria is a webmaster, for more computer related articles
please visit at
href="http://www.articles-hub.com/Category/13.html"
target=>Computers-and-Technology
ravi chamriaHard Disk Detection Problem With BIOS
|
